ESP32-CAM WiFi Module

৳ 620.00

ESP32-CAM WiFi Module ESP32 Serial to WiFi ESP32 CAM Development Board with OV2640 Camera Module

Description

ESP32-CAM WiFi Module

Specifications:
Material: Copper
Module model: ESP32-CAM
Package: DIP-16
Size: 27*40.5*4.5(±0.2)mm
SPI Flash: 32Mbit by default
RAM: Internal 520KB + external 4M PSRAM
BT: BT 4.2BR/EDR and BLE standards
WiFi: 802.11 b/g/n/e/i
Support interface: UARI, SPI, I2C, PWM
Support TF card: maximum support 4G
IO port: 9
Serial port rate: default 115200bps
Image output format: JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range: 2412-2484MHz
Antenna form: onboard PCB antenna, gain 2dBi
Security: WPA/WPA2/WPAS-Enterprise/WPS
Power supply range: 5V
Working temperature: -20 ° C -85 ° C
Storage environment: -40°C-90°C, <90%RH
Package size: 5*5*3cm/1.96*1.96*1.18in
Package weight: 15g

Transmit power:

802.11 b: 17±2dBm (@11Mbps)
802.11 g: 14±2dBm (@54Mbps)
802.11 n: 13±2dBm (@MCS7)
Receive sensitivity:
CCK, 1 Mbps: -90dBm
CCK, 11 Mbps: -85dBm
6Mbps (1/2 BPSK): -88dBm
54Mbps (3/4 64-QAM): -70dBm
MCS7 (65Mbps, 72.2Mbps): -67dBm
Power consumption:
Turn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310Ma@5V
Deep-sleep: The lowest power consumption can reach 6mA@5V
Modern-sleep: up to 20mA@5V
Light-sleep: up to 6.7mA@5V
ESP32-CAM Video Streaming and Face Recognition with Arduino IDE

Troubleshooting Guide

ESP32-CAM schematic

Reviews

There are no reviews yet.

Be the first to review “ESP32-CAM WiFi Module”

Your email address will not be published. Required fields are marked *