Description
The NEO-M8M GPS Module with Ceramic Active Antenna series of concurrent GNSS modules is built on the high performing M8 GNSS engine in the industry proven NEO form factor.
The NEO-M8M is optimized for cost-sensitive applications, while NEO-M8N/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications.
The NEO-M8 modules can also benefit from the u-box Assist Now assistance service. The Online service provides GNNS broadcast parameters, e.g. ephemeris, almanac plus time or rough position to reduce the receiver’s time to first fix significantly and improve acquisition sensitivity. The extended validity of Assist Now Offline data (up to 35 days) and Assist Now Autonomous data (up to 6 days) provide faster acquisition after a long time.
Specifications:
- Input Supply Voltage Range: 3.3V-6V, on board voltage regulator maintains 3.3V
- I/O Maximum Logic Level: 3.6V
- To use with a 5V logic device, such as an Arduino, we suggest level shifting the 5V TX signal using one of the following: Two 1N4148 diodes in series between the TX pin on your 5V device and the RX pin on this GPS module (will drop voltage to ~3.6V,Only recommended for baud rates of 9600 and less ) or Use a logic level converter module such as the Addicore Bi-Directional Logic Level Converter
- 1 second to first fix (TTFF) for hot starts
- 26 seconds to first fix (TTFF) for cold starts
- On board LED will blink after module acquires a position fix and will continue blinking as long as the module has a fix
- 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
- UART: 9600 baud by default, but is configurable from 4800 to 460800 baud
- 18Hz max update rate
- -157dBm Hot start sensitivity
- Position Accuracy: 2 m and better with multiple good satellite signals
- Velocity Accuracy: 0.05 m/s
- Maximum Velocity: 500 m/s
- Heading Accuracy: 0.3 degrees while moving
- Power-optimized architecture with built-in autonomous power saving functions to minimize power consumption at any given time. Furthermore, the receiver can be used in two operating modes: Continuous mode for best performance or Power Save Mode for optimized power consumption respectively.
- Onboard EEPROM for configuration storage
- Onboard battery for battery backed RAM (BBR)
- Battery is recharged through a simple diode and resistor charger circuit from the on board voltage regulator’s 3.3V output
- Four plated mounting holes, 3mm in diameter
- Dimensions of GPS Module: 36mm (1.42in) x 25.8mm (1.02in) x 4mm (0.16in)
- Dimensions of Antenna: 25.5mm (1in) x 25.5mm (1in) x 8.8mm (0.35in)
Features:
- GPS modules NEO-7M, 3V-5V power supply
- Module with ceramic destined antenna, signal super
- With data backup battery
- High quality Immersion Gold PCB
- Module Size: 25*35mm/0.98*1.37″
- Supply Voltage: 3V-5V
- Using imported NEO-7M-0-000 GPS module
- EEPROM power down to save the configuration parameter data
- There are LED lights
- Antenna Size: 25*25mm/0.98*0.98″
- Installation Diameter: 3mm
- The default baud rate: 9600
Applications:
Product Contents:
- 1 – u-blox NEO-M8N GY-GPSV3-NEO-M8N GPS / GNSS module with on board EEPROM
- 1 – GPS antenna
- 1 – 1×4 male header
Reviews
There are no reviews yet.