Nema-17 17HS3401 Stepper Motor

Description

A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire bipolar stepper has 1.7? per step for smooth motion and a nice holding torque. This motor was specified to have a max current of 1.7A/phase so that it could be driven easily with common motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery. The motors are supplied with a 30cm long power cable with a 4-pin female connector.

Specification:

• Name : Stepper Motor
• Model: 17HS3401
• Wiring Configuration: 4-Wire Bipolar
• Actual Rated Input Voltage: 12-24VDC
• Holding Torque: 0.25Nm
• Current Type: DC
• Rated Current : 1.3A
• Resistance per Phase: 30Ω±10%
• Full Step Angle: 1.8° Degree
• Nominal Rated Input Voltage: 24 V, 12 V
• Step angle accuracy: + – 5% (full step, not load)
• Resistance accuracy: + – 10%
• Inductance accuracy: + – 20%
• Temperature rise: 80deg Max (rated current, 2 phase on)
• Ambient temperature: 20deg ~ +50deg
• Insulation resistance: 100MΩ Min, 500VDC
• Insulation Strength: 500VAC for one minute
• Motor Dimension Size: 42x42x34mm
• Shaft Length: 22mm
• Shaft Diameter: 5mm
• Motor Weight: 220gm

Features:

• Low noise.
• Low heat.
• Smooth operation.
• Good acceleration performance.
• The use of advanced technology reduces noise.
• Reduced automatic errors caused by the use of reduction gears.
• Made of high quality alloy material, durable and long service.
• The motor adopt 4 pin cable outlet method, easy to connect.
• Adopting high quality motor steel material, with high torque, low self-inductance reactance, responsive and can avoid system error.
• There is rotor rubber covering the rotor, effectively reduce the noise.
• Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction.
• Small size, convenient storage and placement.