USB to TTL UART Module CH340

৳ 250.00

CP2102 USB 2.0 to UART TTL 5PIN Connector Module Serial Converter

Category:

Description

CP2102 USB 2.0 to UART TTL 5PIN Connector Module Serial Converter New

Module parameters:
1.PCB size: 26.5mm * 15.6mm
2.PCB Color: Black
3. Weight: 4g
4. Using the new chip CH340
5. with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download
6. With three LEDs: power indicator, the indicator data reception, data transmission indicator, work status at a glance
7. 3.3V and 5V with two power output
8. all the useful lead pins
9. with reset signal output can be directly Pro mini and other Ard uino board to download!
10. Compatible Operating Systems:
-Windows 98 / Me / 2000 / XP / 7
-MAC OS-9
-MAC OS
-X-Windows CE
-Linux 2.40 or later

Invoice:

1. Test a good CH340 module (single anti-static bag)

2. Data A (to download)

CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), to support a full-featured modem signal without any external USB devices. Similar to other works CP2102 USB-UART switching circuit by the driver into the PC’s USB port virtual COM port expansion to achieve the purpose.

Property

1. embedded USB transceiver, no external circuit device
2. containing clock circuit, no external circuit device
3. contains power-on reset circuit
The on-chip voltage regulator within the 3.3V output
5. Meet the USB2.0 specification requirements
6.SUSPEND pins support USB suspend state
7. asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
8. Support data format is 8 data bits, 1 stop bit and the parity bit
9. connotation 512 byte receive buffer and 512 byte transmit buffer
10. Supports hardware or X-ON / X-OFF Handshake

Reviews

There are no reviews yet.

Be the first to review “USB to TTL UART Module CH340”

Your email address will not be published. Required fields are marked *